FreeBSD Manual Pages
EX(4) FreeBSD/i386 Kernel Interfaces Manual EX(4) NAME ex -- Ethernet device driver for the Intel EtherExpress Pro/10 and Pro/10+ SYNOPSIS device ex0 at isa? port? irq ? DESCRIPTION The ex driver provides support for the 16-bit PCI Intel EtherExpress Pro/10 and Pro/10+ Ethernet cards based on the Intel i82595 chip. If the port start address isn't found, the card will be searched for in the I/O address range 0x200 - 0x3a0. If the IRQ isn't specified, it will be read from the EEPROM on the card. For correct operation on newer cards the Plug-N-Play support should be disabled. DIAGNOSTICS ex%d: Intel EtherExpress Pro/10, address %6D, connector %s The device probe found an installed card, and was able to correctly install the device driver. ex%d: WARNING: board's EEPROM is configured for IRQ %d, using %d The device probe detected that the board is configured for a different inter- rupt than the one specified in the kernel configuration file. ex%d: invalid IRQ. The device probe detected an invalid IRQ setting. BUGS Currently the driver does not support multicast. SEE ALSO arp(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY The ex device driver first appeared in FreeBSD 2.2. AUTHORS The ex device driver was written by Javier Martin Rueda. This manual page was written by David E. O'Brien. FreeBSD 11.1 January 19, 1997 FreeBSD 11.1
NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | BUGS | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ex&sektion=4&manpath=FreeBSD+4.5-RELEASE>