FreeBSD Manual Pages
FIND(1) FreeBSD General Commands Manual FIND(1) NAME find -- walk a file hierarchy SYNOPSIS find [-H | -L | -P] [-EXdsx] [-f pathname] [pathname ...] expression DESCRIPTION Find recursively descends the directory tree for each pathname listed, evaluating an expression (composed of the ``primaries'' and ``operands'' listed below) in terms of each file in the tree. The options are as follows: -E Interpret regular expressions followed by -regex and -iregex options as extended (modern) regular expressions rather than basic regular expressions (BRE's). The re_format(7) manual page fully describes both formats. -H The -H option causes the file information and file type (see stat(2)) returned for each symbolic link specified on the command line to be those of the file referenced by the link, not the link itself. If the referenced file does not exist, the file informa- tion and type will be for the link itself. File information of all symbolic links not on the command line is that of the link itself. -L The -L option causes the file information and file type (see stat(2)) returned for each symbolic link to be those of the file referenced by the link, not the link itself. If the referenced file does not exist, the file information and type will be for the link itself. -P The -P option causes the file information and file type (see stat(2)) returned for each symbolic link to be those of the link itself. This is the default. -X The -X option is a modification to permit find to be safely used in conjunction with xargs(1). If a file name contains any of the delimiting characters used by xargs(1), a diagnostic message is displayed on standard error, and the file is skipped. The delim- iting characters include single (`` ' '') and double (`` " '') quotes, backslash (``\''), space, tab and newline characters. -d The -d option causes find to perform a depth-first traversal, i.e., directories are visited in post-order and all entries in a directory will be acted on before the directory itself. By default, find visits directories in pre-order, i.e., before their contents. Note, the default is not a breadth-first traversal. -f The -f option specifies a file hierarchy for find to traverse. File hierarchies may also be specified as the operands immedi- ately following the options. -s The -s option causes find to traverse the file hierarchies in lexicographical order, i.e., alphabetical order within each directory. Note: `find -s' and `find | sort' may give different results. -x The -x option prevents find from descending into directories that have a device number different than that of the file from which the descent began. PRIMARIES -amin n True if the difference between the file last access time and the time find was started, rounded up to the next full minute, is n minutes. -anewer file Same as -neweram. -atime n True if the difference between the file last access time and the time find was started, rounded up to the next full 24-hour period, is n 24-hour periods. -cmin n True if the difference between the time of last change of file status information and the time find was started, rounded up to the next full minute, is n minutes. -cnewer file Same as -newercm. -ctime n True if the difference between the time of last change of file status information and the time find was started, rounded up to the next full 24-hour period, is n 24-hour periods. -delete Delete found files and/or directories. Always returns true. This executes from the current working directory as find recurses down the tree. It will not attempt to delete a filename with a ``/'' character in its pathname relative to ``.'' for security reasons. Depth-first traversal processing is implied by this option. -depth Always true; same as the -d option. -depth can be useful when find is used with cpio(1) to process files that are contained in directories with unusual permissions. It enures that you have write permission while you are placing files in a directory, then sets the directory's permissions as the last thing. -empty True if the current file or directory is empty. -exec utility [argument ...]; True if the program named utility returns a zero value as its exit status. Optional arguments may be passed to the utility. The expression must be terminated by a semicolon (``;''). If the string ``{}'' appears anywhere in the utility name or the argu- ments it is replaced by the pathname of the current file. Utility will be executed from the directory from which find was executed. Utility and arguments are not subject to the further expansion of shell patterns and constructs. -execdir utility [argument ...]; The -execdir primary is identical to the -exec primary with the exception that utility will be executed from the directory that holds the current file. The filename substituted for the string ``{}'' is not qualified. -flags [-|+]flags,notflags The flags are specified using symbolic names (see chflags(1)). Those with the "no" prefix (except "nodump") are said to be notflags. Flags in flags are checked to be set, and flags in notflags are checked to be not set. Note that this is different from -perm, which only allows the user to specify mode bits that are set. If flags are preceded by a dash (``-''), this primary evaluates to true if at least all of the bits in flags and none of the bits in notflags are set in the file's flags bits. If flags are pre- ceded by a plus (``+''), this primary evaluates to true if any of the bits in flags is set in the file's flags bits, or any of the bits in notflags is not set in the file's flags bits. Otherwise, this primary evaluates to true if the bits in flags exactly match the file's flags bits, and none of the flags bits match those of notflags. -fstype type True if the file is contained in a file system of type type. The sysctl(8) command can be used to find out the types of filesys- tems that are available on the system: sysctl vfs In addition, there are two pseudo-types, ``local'' and ``rdonly''. The former matches any file system physically mounted on the system where the find is being executed and the latter matches any file system which is mounted read-only. -group gname True if the file belongs to the group gname. If gname is numeric and there is no such group name, then gname is treated as a group ID. -iname pattern Like -name, but the match is case insensitive. -inum n True if the file has inode number n. -ipath pattern Like -path, but the match is case insensitive. -iregex pattern Like -regex, but the match is case insensitive. -links n True if the file has n links. -ls This primary always evaluates to true. The following information for the current file is written to standard output: its inode number, size in 512-byte blocks, file permissions, number of hard links, owner, group, size in bytes, last modification time, and pathname. If the file is a block or character special file, the major and minor numbers will be displayed instead of the size in bytes. If the file is a symbolic link, the pathname of the linked-to file will be displayed preceded by ``->''. The format is identical to that produced by ls -dgils. -maxdepth n True if the depth of the current file into the tree is less than or equal to n. -mindepth n True if the depth of the current file into the tree is greater than or equal to n. -mmin n True if the difference between the file last modification time and the time find was started, rounded up to the next full minute, is n minutes. -mnewer file Same as -newer. -mtime n True if the difference between the file last modification time and the time find was started, rounded up to the next full 24-hour period, is n 24-hour periods. -name pattern True if the last component of the pathname being examined matches pattern. Special shell pattern matching characters (``['', ``]'', ``*'', and ``?'') may be used as part of pattern. These characters may be matched explicitly by escaping them with a backslash (``\''). -newer file True if the current file has a more recent last modification time than file. -newerXY file True if the current file has a more recent last access time (X=a), change time (X=c), or modification time (X=m) than the last access time (Y=a), change time (Y=c), or modification time (Y=m) of file. In addition, if Y=t, then file is instead inter- preted as a direct date specification of the form understood by cvs(1). Note that -newermm is equivalent to -newer. -nogroup True if the file belongs to an unknown group. -nouser True if the file belongs to an unknown user. -ok utility [argument ...]; The -ok primary is identical to the -exec primary with the excep- tion that find requests user affirmation for the execution of the utility by printing a message to the terminal and reading a response. If the response is other than ``y'' the command is not executed and the value of the -ok expression is false. -okdir utility [argument ...]; The -okdir primary is identical to the -execdir primary with the same exception as described for the -ok primary. -path pattern True if the pathname being examined matches pattern. Special shell pattern matching characters (``['', ``]'', ``*'', and ``?'') may be used as part of pattern. These characters may be matched explicitly by escaping them with a backslash (``\''). Slashes (``/'') are treated as normal characters and do not have to be matched explicitly. -perm [-|+]mode The mode may be either symbolic (see chmod(1)) or an octal num- ber. If the mode is symbolic, a starting value of zero is assumed and the mode sets or clears permissions without regard to the process' file mode creation mask. If the mode is octal, only bits 07777 (S_ISUID | S_ISGID | S_ISTXT | S_IRWXU | S_IRWXG | S_IRWXO) of the file's mode bits participate in the comparison. If the mode is preceded by a dash (``-''), this primary evaluates to true if at least all of the bits in the mode are set in the file's mode bits. If the mode is preceded by a plus (``+''), this primary evaluates to true if any of the bits in the mode are set in the file's mode bits. Otherwise, this primary evaluates to true if the bits in the mode exactly match the file's mode bits. Note, the first character of a symbolic mode may not be a dash (``-''). -print This primary always evaluates to true. It prints the pathname of the current file to standard output. If none of -exec, -ls, -print0, or -ok is specified, the given expression shall be effectively replaced by ( given expression ) -print. -print0 This primary always evaluates to true. It prints the pathname of the current file to standard output, followed by an ASCII NUL character (character code 0). -prune This primary always evaluates to true. It causes find to not descend into the current file. Note, the -prune primary has no effect if the -d option was specified. -regex pattern True if the whole path of the file matches pattern using regular expression. To match a file named ``./foo/xyzzy'', you can use the regular expression ``.*/[xyz]*'' or ``.*/foo/.*'', but not ``xyzzy'' or ``/foo/''. -size n[c] True if the file's size, rounded up, in 512-byte blocks is n. If n is followed by a c, then the primary is true if the file's size is n bytes (characters). -type t True if the file is of the specified type. Possible file types are as follows: b block special c character special d directory f regular file l symbolic link p FIFO s socket -user uname True if the file belongs to the user uname. If uname is numeric and there is no such user name, then uname is treated as a user ID. All primaries which take a numeric argument allow the number to be pre- ceded by a plus sign (``+'') or a minus sign (``-''). A preceding plus sign means ``more than n'', a preceding minus sign means ``less than n'' and neither means ``exactly n''. OPERATORS The primaries may be combined using the following operators. The opera- tors are listed in order of decreasing precedence. ( expression ) This evaluates to true if the parenthesized expression evaluates to true. ! expression This is the unary NOT operator. It evaluates to true if the expression is false. expression -and expression expression expression The -and operator is the logical AND operator. As it is implied by the juxtaposition of two expressions it does not have to be specified. The expression evaluates to true if both expressions are true. The second expression is not evaluated if the first expression is false. expression -or expression The -or operator is the logical OR operator. The expres- sion evaluates to true if either the first or the second expression is true. The second expression is not evalu- ated if the first expression is true. All operands and primaries must be separate arguments to find. Primaries which themselves take arguments expect each argument to be a separate argument to find. EXAMPLES The following examples are shown as given to the shell: find / \! -name "*.c" -print Print out a list of all the files whose names do not end in .c. find / -newer ttt -user wnj -print Print out a list of all the files owned by user ``wnj'' that are newer than the file ttt. find / \! \( -newer ttt -user wnj \) -print Print out a list of all the files which are not both newer than ttt and owned by ``wnj''. find / \( -newer ttt -or -user wnj \) -print Print out a list of all the files that are either owned by ``wnj'' or that are newer than ttt. find . -newerct '1 minute ago' -print Print out a list of all the files whose inode change time is more recent than the current time minus one minute. SEE ALSO chflags(1), chmod(1), cvs(1), locate(1), whereis(1), which(1), stat(2), fts(3), getgrent(3), getpwent(3), strmode(3), re_format(7), symlink(7) STANDARDS The find utility syntax is a superset of the syntax specified by the IEEE Std 1003.2 (``POSIX.2'') standard. All the single character options as well as the -iname, -inum, -iregex, -print0, -delete, -ls, and -regex primaries are extensions to IEEE Std 1003.2 (``POSIX.2''). Historically, the -d, -h and -x options were implemented using the pri- maries -depth, -follow, and -xdev. These primaries always evaluated to true. As they were really global variables that took effect before the traversal began, some legal expressions could have unexpected results. An example is the expression -print -o -depth. As -print always evalu- ates to true, the standard order of evaluation implies that -depth would never be evaluated. This is not the case. The operator -or was implemented as -o, and the operator -and was imple- mented as -a. Historic implementations of the -exec and -ok primaries did not replace the string ``{}'' in the utility name or the utility arguments if it had preceding or following non-whitespace characters. This version replaces it no matter where in the utility name or arguments it appears. The -E option was implemented on the analogy of grep(1) and sed(1). BUGS The special characters used by find are also special characters to many shell programs. In particular, the characters ``*'', ``['', ``]'', ``?'', ``('', ``)'', ``!'', ``\'' and ``;'' may have to be escaped from the shell. As there is no delimiter separating options and file names or file names and the expression, it is difficult to specify files named -xdev or !. These problems are handled by the -f option and the getopt(3) ``--'' con- struct. The -delete primary does not interact well with other options that cause the filesystem tree traversal options to be changed. HISTORY A find command appeared in Version 1 AT&T UNIX. FreeBSD 11.1 May 3, 2001 FreeBSD 11.1
NAME | SYNOPSIS | DESCRIPTION | PRIMARIES | OPERATORS | EXAMPLES | SEE ALSO | STANDARDS | BUGS | HISTORY
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=find&sektion=1&manpath=FreeBSD+4.5-RELEASE>