FreeBSD Manual Pages
GPART(8) FreeBSD System Manager's Manual GPART(8) NAME gpart -- control utility for the disk partitioning GEOM class SYNOPSIS To add support for the disk partitioning GEOM class, place one or more of the following lines in your kernel configuration file: options GEOM_PART_APM options GEOM_PART_BSD options GEOM_PART_EBR options GEOM_PART_GPT options GEOM_PART_MBR options GEOM_PART_PC98 options GEOM_PART_VTOC8 The GEOM_PART_APM option adds support for the Apple Partition Map (APM) found on Apple Macintosh computers. The GEOM_PART_BSD option adds sup- port for the traditional BSD disklabel. The GEOM_PART_EBR option adds support for the Extended Boot Record (EBR), which is used to define a logical partition. The GEOM_PART_GPT option adds support for the GUID Partition Table (GPT) found on Intel Itanium computers and Intel-based Macintosh computers. The GEOM_PART_MBR option adds support for the Mas- ter Boot Record (MBR) found on PCs and used on many removable media. The GEOM_PART_PC98 option adds support for the MBR variant as used on NEC PC-98 computers. The GEOM_PART_VTOC8 option adds support for Sun's SMI VTOC8 label as found on computers based on SPARC64 and UltraSPARC. Usage of the gpart utility: gpart add -t type [-b start] [-s size] [-i index] [-l label] [-f flags] geom gpart backup geom gpart bootcode [-b bootcode] [-p partcode -i index] [-f flags] geom gpart commit geom gpart create -s scheme [-n entries] [-f flags] provider gpart delete -i index [-f flags] geom gpart destroy [-F] [-f flags] geom gpart modify -i index [-l label] [-t type] [-f flags] geom gpart recover [-f flags] geom gpart resize -i index [-s size] [-f flags] geom gpart restore [-lF] [-f flags] provider [...] gpart set -a attrib -i index [-f flags] geom gpart show [-lr] [geom ...] gpart undo geom gpart unset -a attrib -i index [-f flags] geom DESCRIPTION The gpart utility is used to partition GEOM providers, normally disks. The first argument of which is the action to be taken: add Add a new partition to the partitioning scheme given by geom. The partition begins on the logical block address given by the -b start option. Its size is given by the -s size option. SI unit suffixes are allowed. One or both -b and -s options can be ommitted. If so they are automatically calculated. The type of the partition is given by the -t type option. Partition types are discussed below in the section entitled PARTITION TYPES. Additional options include: -i index The index in the partition table at which the new partition is to be placed. The index determines the name of the device special file used to repre- sent the partition. -l label The label attached to the partition. This option is only valid when used on partitioning schemes that support partition labels. -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. backup Dump a partition table to standard output in special format used by restore action. bootcode Embed bootstrap code into the partitioning scheme's metadata on the geom (using -b bootcode) or write bootstrap code into a partition (using -p partcode and -i index). Not all partition- ing schemes have embedded bootstrap code, so the -b bootcode option is scheme-specific in nature. For the GPT scheme, embedded bootstrap code is supported. The bootstrap code is embedded in the protective MBR rather than the GPT. The -b bootcode option specifies a file that contains the bootstrap code. The contents and size of the file are determined by the partitioning scheme. For the MBR scheme, it is a 512 byte file of which the first 446 bytes are installed as bootstrap code. The -p partcode option specifies a file that contains the boot- strap code intended to be written to a partition. For the VTOC8 scheme, it is a 8192 byte file of which the last 7680 bytes are installed as bootstrap code. The partition is speci- fied by the -i index option. For the VTOC8 scheme, if the -i index option is omitted, the bootstrap code is written to all sufficiently large partitions. The size of the file must be smaller than the size of the partition. Additional options include: -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. commit Commit any pending changes for geom geom. All actions are being committed by default and will not result in pending changes. Actions can be modified with the -f flags option so that they are not being committed by default. As such, they become pending. Pending changes are reflected by the geom and the gpart utility, but they are not actually written to disk. The commit action will write any and all pending changes to disk. create Create a new partitioning scheme on a provider given by provider. The -s scheme option determines the scheme to use. The kernel needs to have support for a particular scheme before that scheme can be used to partition a disk. Additional options include: -n entries The number of entries in the partition table. Every partitioning scheme has a minimum and a maxi- mum number of entries and this option allows tables to be created with the number of entries that lies anywhere between the minimum and the maximum. Some schemes have a maximum equal to the minimum and some schemes have a maximum large enough to be con- sidered unlimited. By default, partition tables are created with the minimum number of entries. -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. delete Delete a partition from geom geom and further identified by the -i index option. The partition cannot be actively used by the kernel. Additional options include: -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. destroy Destroy the partitioning scheme as implemented by geom geom. Additional options include: -F Forced destroying of the partition table even if it is not empty. -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. modify Modify a partition from geom geom and further identified by the -i index option. Only the the type and/or label of the parti- tion can be modified. To change the type of a partition, spec- ify the new type with the -t type option. To change the label of a partition, specify the new label with the -l label option. Not all partitioning schemes support labels and it is invalid to try to change a partition label in such cases. Additional options include: -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. recover Recover corrupt partition's scheme metadata on the geom geom. See the section entitled RECOVERING below for the additional information. Additional options include: -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. resize Resize a partition from geom geom and further identified by the -i index option. New partition size is expressed in logical block numbers and can be given by the -s size option. If -s option is omitted then new size is automatically calculated to maximum available from given geom geom. Additional options include: -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. restore Restore the partition table from backup previously created by backup action and given from standard input. Only partition ta- ble may be restored. This action does not affect content of partitions. This mean that you should copy your data from backup after restoring partition table and write bootcode again if it is needed. Additional options include: -F Destroy partition table on the given provider before doing restore. -l Restore partition labels for partitioning schemes that support them. -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. set Set the named attribute on the partition entry. See the sec- tion entitled ATTRIBUTES below for a list of available attributes. Additional options include: -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. show Show the current partition information of the specified geoms or all geoms if none are specified. Additional options include: -l For partition schemes that support partition labels print them instead of partition type. -r Show raw partition type instead of symbolic name. undo Revert any pending changes for geom geom. This action is the opposite of the commit action and can be used to undo any changes that have not been committed. unset Clear the named attribute on the partition entry. See the sec- tion entitled ATTRIBUTES below for a list of available attributes. Additional options include: -f flags Additional operational flags. See the section entitled OPERATIONAL FLAGS below for a discussion about its use. PARTITION TYPES The gpart utility uses symbolic names for common partition types to avoid that the user needs to know what the partitioning scheme in question is and what the actual number or identification needs to be used for a par- ticular type. The gpart utility also allows the user to specify scheme- specific partition types for partition types that do not have symbol names. The symbolic names currently understood are: efi The system partition for computers that use the Extensible Firmware Interface (EFI). In such cases, the GPT parti- tioning scheme is being used and the actual partition type for the system partition can also be specified as "!c12a7328-f81f-11d2-ba4b-00a0c93ec93ab". freebsd A FreeBSD partition that uses the BSD disklabel to sub- divide the partition into file systems. This is a legacy partition type and should not be used for the APM or GPT schemes. The scheme-specific types are "!165" for MBR, "!FreeBSD" for APM, and "!516e7cb4-6ecf-11d6-8ff8-00022d09712b" for GPT. freebsd-boot A FreeBSD partition dedicated to bootstrap code. The scheme-specific type is "!83bd6b9d-7f41-11dc-be0b-001560b84f0f" for GPT. freebsd-swap A FreeBSD partition dedicated to swap space. The scheme- specific types are "!FreeBSD-swap" for APM, "!516e7cb5-6ecf-11d6-8ff8-00022d09712b" for GPT, and tag 0x0901 for VTOC8. freebsd-ufs A FreeBSD partition that contains a UFS or UFS2 file sys- tem. The scheme-specific types are "!FreeBSD-UFS" for APM, "!516e7cb6-6ecf-11d6-8ff8-00022d09712b" for GPT, and tag 0x0902 for VTOC8. freebsd-vinum A FreeBSD partition that contains a Vinum volume. The scheme-specific types are "!FreeBSD-Vinum" for APM, "!516e7cb8-6ecf-11d6-8ff8-00022d09712b" for GPT, and tag 0x0903 for VTOC8. freebsd-zfs A FreeBSD partition that contains a ZFS volume. The scheme-specific types are "!FreeBSD-ZFS" for APM, "!516e7cba-6ecf-11d6-8ff8-00022d09712b" for GPT, and 0x0904 for VTOC8. mbr A partition that is sub-partitioned by a master boot record (MBR). This type is known as "!024dee41-33e7-11d3-9d69-0008c781f39f" by GPT. ATTRIBUTES The scheme-specific attributes for EBR: active The scheme-specific attributes for GPT: bootme When set, the gptboot stage 1 boot loader will try to boot the system from this partition. Multiple partitions might be marked with the bootme attribute. In such scenario the gptboot will try all bootme partitions one by one, until the next boot stage is successfully entered. bootonce Setting this attribute automatically sets the bootme attribute. When set, the gptboot stage 1 boot loader will try to boot the system from this partition only once. Parti- tions with both bootonce and bootme attributes are tried before partitions with only the bootme attribute. Before bootonce partition is tried, the gptboot removes the bootme attribute and tries to execute the next boot stage. If it fails, the bootonce attribute that is now alone is replaced with the bootfailed attribute. If the execution of the next boot stage succeeds, but the system is not fully booted, the gptboot will look for bootonce attributes alone (without the bootme attribute) on the next system boot and will replace those with the bootfailed attribute. If the system is fully booted, the /etc/rc.d/gptboot start-up script will look for partition with the bootonce attribute alone, will remove the attribute and log that the system was successfully booted from this partition. There should be at most one bootonce partition when system is successfully booted. Multiple par- titions might be marked with the bootonce and bootme attribute pairs. bootfailed This attribute should not be manually managed. It is managed by the gptboot stage 1 boot loader and the /etc/rc.d/gptboot start-up script. This attribute is used to mark partitions that had the bootonce attribute set, but we failed to boot from them. Once we successfully boot, the /etc/rc.d/gptboot script will log all the partitions we failed to boot from and will remove the bootfailed attributes. The scheme-specific attributes for MBR: active The scheme-specific attributes for PC98: active bootable OPERATIONAL FLAGS Actions other than the commit and undo actions take an optional -f flags option. This option is used to specify action-specific operational flags. By default, the gpart utility defines the `C' flag so that the action is immediately committed. The user can specify ``-f x'' to have the action result in a pending change that can later, with other pending changes, be committed as a single compound change with the commit action or reverted with the undo action. RECOVERING The GEOM class PART supports recovering of partition tables only for GPT. The GUID partition table has a primary and secondary (backup) copy of metadata for redundance. They are stored in the begining and in the end of device respectively. Therefore it is acceptable to have some corrup- tions in the metadata that are not fatal to work with GPT. When kernel detects corrupt metadata it marks this table as corrupt and reports about corruption. Any changes in corrupt table are prohibited except destroy and recover. In case when only first sector is corrupt kernel can not detect GPT even if partition table is not corrupt. You can write protective MBR with dd(1) command to restore ability of GPT detection. The copy of protective MBR is usually located in the /boot/pmbr file. In case when some of metadata is corrupt you will get to know about this from kernel's messages like these: GEOM: provider: the primary GPT table is corrupt or invalid. GEOM: provider: using the secondary instead -- recovery strongly advised. or GEOM: provider: the secondary GPT table is corrupt or invalid. GEOM: provider: using the primary only -- recovery suggested. Also gpart commands like show, status and list will report about corrupt table. In case when the size of device has changed (e.g. volume expansion) the secondary GPT header will become located not in the last sector. This is not a metadata corruption, but it is dangerous because any corruption of the primary GPT will lead to lost of partition table. Kernel reports about this problem with message: GEOM: provider: the secondary GPT header is not in the last LBA. A corrupt table can be recovered with gpart recover command. This command does reconstruction of corrupt metadata using known valid metadata. Also it can relocate secondary GPT to the end of device. NOTE: The GEOM class PART can detect the same partition table on differ- ent GEOM providers and some of them will marked as corrupt. Be careful when choising a provider for recovering. If you did incorrect choise you can destroy metadata of another GEOM class, e.g. GEOM MIRROR or GEOM LABEL. EXIT STATUS Exit status is 0 on success, and 1 if the command fails. EXAMPLES Create GPT scheme on ad0. /sbin/gpart create -s GPT ad0 Embed GPT bootstrap code into protective MBR. /sbin/gpart bootcode -b /boot/pmbr ad0 Create a dedicated freebsd-boot partition that can boot FreeBSD from a freebsd-ufs partition, and install bootstrap code into it. This parti- tion must be larger than /boot/gptboot, or the GPT boot you are planning to write, but smaller than 545 KB. A size of 15 blocks (7680 bytes) would be sufficient for booting from UFS but let's use 128 blocks (64 KB) here in this example, in order to reserve some space for potential future need (e.g. from a ZFS partition). /sbin/gpart add -b 34 -s 128 -t freebsd-boot ad0 /sbin/gpart bootcode -p /boot/gptboot -i 1 ad0 Create a 512MB-sized freebsd-ufs partition that would contain UFS where the system boots from. /sbin/gpart add -b 162 -s 1048576 -t freebsd-ufs ad0 Create VTOC8 scheme on da0. /sbin/gpart create -s VTOC8 da0 Create a 512MB-sized freebsd-ufs partition that would contain UFS where the system boots from. /sbin/gpart add -s 512M -t freebsd-ufs da0 After having created all required partitions, embed bootstrap code into them. /sbin/gpart bootcode -p /boot/boot1 da0 Create backup of partition table from da0 /sbin/gpart backup da0 > da0.backup Restore partition table from backup to da0 /sbin/gpart restore -l da0 < /mnt/da0.backup Clone partition table from ada0 to ada1 and ada2 /sbin/gpart backup ada0 | /sbin/gpart restore -F ada1 ada2 SEE ALSO dd(1), geom(4), geom(8) HISTORY The gpart utility appeared in FreeBSD 7.0. AUTHORS Marcel Moolenaar <marcel@FreeBSD.org> FreeBSD 11.1 November 22, 2010 FreeBSD 11.1
NAME | SYNOPSIS | DESCRIPTION | PARTITION TYPES | ATTRIBUTES | OPERATIONAL FLAGS | RECOVERING | EXIT STATUS | EXAMPLES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=gpart&sektion=8&manpath=FreeBSD+8.2-RELEASE>