FreeBSD Manual Pages
JAIL(8) FreeBSD System Manager's Manual JAIL(8) NAME jail -- manage system jails SYNOPSIS jail [-dhilqv] [-J jid_file] [-u username] [-U username] [-cmr] param=value ... [command=command ...] jail [-dqv] [-f conf_file] [-p limit] [-cmr] [jail] jail [-qv] [-f conf_file] [-rR] [* | jail ...] jail [-dhilqv] [-J jid_file] [-u username] [-U username] [-n jailname] [-s securelevel] [path hostname [ip[,...]] command ...] DESCRIPTION The jail utility creates new jails, or modifies or removes existing jails. A jail (or ``prison'') is specified via parameters on the command line, or in the jail.conf(5) file. At least one of the options -c, -m or -r must be specified. These options are used alone or in combination to describe the operation to perform: -c Create a new jail. The jail jid and name parameters (if speci- fied on the command line) must not refer to an existing jail. -m Modify an existing jail. One of the jid or name parameters must exist and refer to an existing jail. Some parameters may not be changed on a running jail. -r Remove the jail specified by jid or name. All jailed processes are killed, and all jails that are children of this jail are also removed. -rc Restart an existing jail. The jail is first removed and then re- created, as if ``jail -r'' and ``jail -c'' were run in succes- sion. -cm Create a jail if it does not exist, or modify the jail if it does exist. -mr Modify an existing jail. The jail may be restarted if necessary to modify parameters than could not otherwise be changed. -cmr Create a jail if it doesn't exist, or modify (and possibly restart) the jail if it does exist. Other available options are: -d Allow making changes to a dying jail, equivalent to the allow.dying parameter. -f conf_file Use configuration file conf_file instead of the default /etc/jail.conf. -h Resolve the host.hostname parameter (or hostname) and add all IP addresses returned by the resolver to the list of addresses for this jail. This is equivalent to the ip_hostname parameter. -i Output (only) the jail identifier of the newly created jail(s). This implies the -q option. -J jid_file Write a jid_file file, containing the parameters used to start the jail. -l Run commands in a clean environment. This is deprecated and is equivalent to the exec.clean parameter. -n jailname Set the jail's name. This is deprecated and is equivalent to the name parameter. -p limit Limit the number of commands from exec.* that can run simultane- ously. -q Suppress the message printed whenever a jail is created, modified or removed. Only error messages will be printed. -R A variation of the -r option that removes an existing jail with- out using the configuration file. No removal-related parameters for this jail will be used -- the jail will simply be removed. -s securelevel Set the kern.securelevel MIB entry to the specified value inside the newly created jail. This is deprecated and is equivalent to the securelevel parameter. -u username The user name from host environment as whom jailed commands should run. This is deprecated and is equivalent to the exec.jail_user and exec.system_jail_user parameters. -U username The user name from the jailed environment as whom jailed commands should run. This is deprecated and is equivalent to the exec.jail_user parameter. -v Print a message on every operation, such as running commands and mounting filesystems. If no arguments are given after the options, the operation (except remove) will be performed on all jails specified in the jail.conf(5) file. A single argument of a jail name will operate only on the speci- fied jail. The -r and -R options can also remove running jails that aren't in the jail.conf(5) file, specified by name or jid. An argument of ``*'' is a wildcard that will operate on all jails, regardless of whether they appear in jail.conf(5); this is the surest way for -r to remove all jails. If hierarchical jails exist, a partial- matching wildcard definition may be specified. For example, an argument of ``foo.*'' would apply to jails with names like ``foo.bar'' and ``foo.bar.baz''. A jail may be specified with parameters directly on the command line. In this case, the jail.conf(5) file will not be used. For backward compati- bility, the command line may also have four fixed parameters, without names: path, hostname, ip, and command. This mode will always create a new jail, and the -c and -m options do not apply (and must not be present). Jail Parameters Parameters in the jail.conf(5) file, or on the command line, are gener- ally of the form ``name=value''. Some parameters are boolean, and do not have a value but are set by the name alone with or without a ``no'' pre- fix, e.g. persist or nopersist. They can also be given the values ``true'' and ``false''. Other parameters may have more than one value, specified as a comma-separated list or with ``+='' in the configuration file (see jail.conf(5) for details). The jail utility recognizes two classes of parameters. There are the true jail parameters that are passed to the kernel when the jail is cre- ated, which can be seen with jls(8), and can (usually) be changed with ``jail -m''. Then there are pseudo-parameters that are only used by jail itself. Jails have a set of core parameters, and kernel modules can add their own jail parameters. The current set of available parameters can be retrieved via ``sysctl -d security.jail.param''. Any parameters not set will be given default values, often based on the current environment. The core parameters are: jid The jail identifier. This will be assigned automatically to a new jail (or can be explicitly set), and can be used to identify the jail for later modification, or for such commands as jls(8) or jexec(8). name The jail name. This is an arbitrary string that identifies a jail (except it may not contain a `.'). Like the jid, it can be passed to later jail commands, or to jls(8) or jexec(8). If no name is supplied, a default is assumed that is the same as the jid. The name parameter is implied by the jail.conf(5) file for- mat, and need not be explicitly set when using the configuration file. path The directory which is to be the root of the jail. Any commands run inside the jail, either by jail or from jexec(8), are run from this directory. ip4.addr A list of IPv4 addresses assigned to the jail. If this is set, the jail is restricted to using only these addresses. Any attempts to use other addresses fail, and attempts to use wild- card addresses silently use the jailed address instead. For IPv4 the first address given will be used as the source address when source address selection on unbound sockets cannot find a better match. It is only possible to start multiple jails with the same IP address if none of the jails has more than this single over- lapping IP address assigned to itself. ip4.saddrsel A boolean option to change the formerly mentioned behaviour and disable IPv4 source address selection for the jail in favour of the primary IPv4 address of the jail. Source address selection is enabled by default for all jails and the ip4.nosaddrsel set- ting of a parent jail is not inherited for any child jails. ip4 Control the availability of IPv4 addresses. Possible values are ``inherit'' to allow unrestricted access to all system addresses, ``new'' to restrict addresses via ip4.addr, and ``disable'' to stop the jail from using IPv4 entirely. Setting the ip4.addr parameter implies a value of ``new''. ip6.addr, ip6.saddrsel, ip6 A set of IPv6 options for the jail, the counterparts to ip4.addr, ip4.saddrsel and ip4 above. vnet Create the jail with its own virtual network stack, with its own network interfaces, addresses, routing table, etc. The kernel must have been compiled with the VIMAGE option for this to be available. Possible values are ``inherit'' to use the system network stack, possibly with restricted IP addresses, and ``new'' to create a new network stack. host.hostname The hostname of the jail. Other similar parameters are host.domainname, host.hostuuid and host.hostid. host Set the origin of hostname and related information. Possible values are ``inherit'' to use the system information and ``new'' for the jail to use the information from the above fields. Set- ting any of the above fields implies a value of ``new''. securelevel The value of the jail's kern.securelevel sysctl. A jail never has a lower securelevel than its parent system, but by setting this parameter it may have a higher one. If the system securelevel is changed, any jail securelevels will be at least as secure. devfs_ruleset The number of the devfs ruleset that is enforced for mounting devfs in this jail. A value of zero (default) means no ruleset is enforced. Descendant jails inherit the parent jail's devfs ruleset enforcement. Mounting devfs inside a jail is possible only if the allow.mount and allow.mount.devfs permissions are effective and enforce_statfs is set to a value lower than 2. Devfs rules and rulesets cannot be viewed or modified from inside a jail. NOTE: It is important that only appropriate device nodes in devfs be exposed to a jail; access to disk devices in the jail may per- mit processes in the jail to bypass the jail sandboxing by modi- fying files outside of the jail. See devfs(8) for information on how to use devfs rules to limit access to entries in the per-jail devfs. A simple devfs ruleset for jails is available as ruleset #4 in /etc/defaults/devfs.rules. children.max The number of child jails allowed to be created by this jail (or by other jails under this jail). This limit is zero by default, indicating the jail is not allowed to create child jails. See the Hierarchical Jails section for more information. children.cur The number of descendants of this jail, including its own child jails and any jails created under them. enforce_statfs This determines what information processes in a jail are able to get about mount points. It affects the behaviour of the follow- ing syscalls: statfs(2), fstatfs(2), getfsstat(2), and fhstatfs(2) (as well as similar compatibility syscalls). When set to 0, all mount points are available without any restric- tions. When set to 1, only mount points below the jail's chroot directory are visible. In addition to that, the path to the jail's chroot directory is removed from the front of their path- names. When set to 2 (default), above syscalls can operate only on a mount-point where the jail's chroot directory is located. persist Setting this boolean parameter allows a jail to exist without any processes. Normally, a command is run as part of jail creation, and then the jail is destroyed as its last process exits. A new jail must have either the persist parameter or exec.start or command pseudo-parameter set. cpuset.id The ID of the cpuset associated with this jail (read-only). dying This is true if the jail is in the process of shutting down (read-only). parent The jid of the parent of this jail, or zero if this is a top- level jail (read-only). osrelease The string for the jail's kern.osrelease sysctl and uname -r. osreldate The number for the jail's kern.osreldate and uname -K. allow.* Some restrictions of the jail environment may be set on a per- jail basis. With the exception of allow.set_hostname, these boolean parameters are off by default. allow.set_hostname The jail's hostname may be changed via hostname(1) or sethostname(3). allow.sysvipc A process within the jail has access to System V IPC primitives. This is deprecated in favor of the per-mod- ule parameters (see below). When this parameter is set, it is equivalent to setting sysvmsg, sysvsem, and sysvshm all to ``inherit''. allow.raw_sockets The jail root is allowed to create raw sockets. Setting this parameter allows utilities like ping(8) and traceroute(8) to operate inside the jail. If this is set, the source IP addresses are enforced to comply with the IP address bound to the jail, regardless of whether or not the IP_HDRINCL flag has been set on the socket. Since raw sockets can be used to configure and interact with various network subsystems, extra caution should be used where privileged access to jails is given out to untrusted parties. allow.chflags Normally, privileged users inside a jail are treated as unprivileged by chflags(2). When this parameter is set, such users are treated as privileged, and may manipulate system file flags subject to the usual constraints on kern.securelevel. allow.mount privileged users inside the jail will be able to mount and unmount file system types marked as jail-friendly. The lsvfs(1) command can be used to find file system types available for mount from within a jail. This per- mission is effective only if enforce_statfs is set to a value lower than 2. allow.mount.devfs privileged users inside the jail will be able to mount and unmount the devfs file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. The devfs ruleset should be restricted from the default by using the devfs_ruleset option. allow.mount.fdescfs privileged users inside the jail will be able to mount and unmount the fdescfs file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. allow.mount.nullfs privileged users inside the jail will be able to mount and unmount the nullfs file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. allow.mount.procfs privileged users inside the jail will be able to mount and unmount the procfs file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. allow.mount.linprocfs privileged users inside the jail will be able to mount and unmount the linprocfs file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. allow.mount.linsysfs privileged users inside the jail will be able to mount and unmount the linsysfs file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. allow.mount.tmpfs privileged users inside the jail will be able to mount and unmount the tmpfs file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. allow.mount.zfs privileged users inside the jail will be able to mount and unmount the ZFS file system. This permission is effective only together with allow.mount and only when enforce_statfs is set to a value lower than 2. See zfs(8) for information on how to configure the ZFS filesystem to operate from within a jail. allow.quotas The jail root may administer quotas on the jail's filesystem(s). This includes filesystems that the jail may share with other jails or with non-jailed parts of the system. allow.socket_af Sockets within a jail are normally restricted to IPv4, IPv6, local (UNIX), and route. This allows access to other protocol stacks that have not had jail functional- ity added to them. Kernel modules may add their own parameters, which only exist when the module is loaded. These are typically headed under a parameter named after the module, with values of ``inherit'' to give the jail full use of the module, ``new'' to encapsulate the jail in some module-specific way, and ``disable'' to make the module unavailable to the jail. There also may be other parameters to define jail behavior within the module. Mod- ule-specific parameters include: linux Determine how a jail's Linux emulation environment appears. A value of ``inherit'' will keep the same environment, and ``new'' will give the jail it's own environment (still originally inher- ited when the jail is created). linux.osname, linux.osrelease, linux.oss_version The Linux OS name, OS release, and OSS version associated with this jail. sysvmsg Allow access to SYSV IPC message primitives. If set to ``inherit'', all IPC objects on the system are visible to this jail, whether they were created by the jail itself, the base sys- tem, or other jails. If set to ``new'', the jail will have its own key namespace, and can only see the objects that it has cre- ated; the system (or parent jail) has access to the jail's objects, but not to its keys. If set to ``disable'', the jail cannot perform any sysvmsg-related system calls. sysvsem, sysvshm Allow access to SYSV IPC semaphore and shared memory primitives, in the same manner as sysvmsg. There are pseudo-parameters that are not passed to the kernel, but are used by jail to set up the jail environment, often by running specified commands when jails are created or removed. The exec.* command parame- ters are sh(1) command lines that are run in either the system or jail environment. They may be given multiple values, which would run the specified commands in sequence. All commands must succeed (return a zero exit status), or the jail will not be created or removed, as appropriate. The pseudo-parameters are: exec.prestart Command(s) to run in the system environment before a jail is cre- ated. exec.start Command(s) to run in the jail environment when a jail is created. A typical command to run is ``sh /etc/rc''. command A synonym for exec.start for use when specifying a jail directly on the command line. Unlike other parameters whose value is a single string, command uses the remainder of the jail command line as its own arguments. exec.poststart Command(s) to run in the system environment after a jail is cre- ated, and after any exec.start commands have completed. exec.prestop Command(s) to run in the system environment before a jail is removed. exec.stop Command(s) to run in the jail environment before a jail is removed, and after any exec.prestop commands have completed. A typical command to run is ``sh /etc/rc.shutdown''. exec.poststop Command(s) to run in the system environment after a jail is removed. exec.clean Run commands in a clean environment. The environment is dis- carded except for HOME, SHELL, TERM and USER. HOME and SHELL are set to the target login's default values. USER is set to the target login. TERM is imported from the current environment. The environment variables from the login class capability data- base for the target login are also set. exec.jail_user The user to run commands as, when running in the jail environ- ment. The default is to run the commands as the current user. exec.system_jail_user This boolean option looks for the exec.jail_user in the system passwd(5) file, instead of in the jail's file. exec.system_user The user to run commands as, when running in the system environ- ment. The default is to run the commands as the current user. exec.timeout The maximum amount of time to wait for a command to complete, in seconds. If a command is still running after this timeout has passed, the jail will not be created or removed, as appropriate. exec.consolelog A file to direct command output (stdout and stderr) to. exec.fib The FIB (routing table) to set when running commands inside the jail. stop.timeout The maximum amount of time to wait for a jail's processes to exit after sending them a SIGTERM signal (which happens after the exec.stop commands have completed). After this many seconds have passed, the jail will be removed, which will kill any remaining processes. If this is set to zero, no SIGTERM is sent and the jail is immediately removed. The default is 10 seconds. interface A network interface to add the jail's IP addresses (ip4.addr and ip6.addr) to. An alias for each address will be added to the interface before the jail is created, and will be removed from the interface after the jail is removed. ip4.addr In addition to the IP addresses that are passed to the kernel, an interface, netmask and additional parameters (as supported by ifconfig(8)) may also be specified, in the form ``interface|ip-address/netmask param ...''. If an interface is given before the IP address, an alias for the address will be added to that interface, as it is with the interface parameter. If a netmask in either dotted-quad or CIDR form is given after an IP address, it will be used when adding the IP alias. If addi- tional parameters are specified then they will also be used when adding the IP alias. ip6.addr In addition to the IP addresses that are passed to the kernel, an interface, prefix and additional parameters (as supported by ifconfig(8)) may also be specified, in the form ``interface|ip-address/prefix param ...''. vnet.interface A network interface to give to a vnet-enabled jail after is it created. The interface will automatically be released when the jail is removed. ip_hostname Resolve the host.hostname parameter and add all IP addresses returned by the resolver to the list of addresses (ip4.addr or ip6.addr) for this jail. This may affect default address selec- tion for outgoing IPv4 connections from jails. The address first returned by the resolver for each address family will be used as the primary address. mount A filesystem to mount before creating the jail (and to unmount after removing it), given as a single fstab(5) line. mount.fstab An fstab(5) format file containing filesystems to mount before creating a jail. mount.devfs Mount a devfs(5) filesystem on the chrooted /dev directory, and apply the ruleset in the devfs_ruleset parameter (or a default of ruleset 4: devfsrules_jail) to restrict the devices visible inside the jail. mount.fdescfs Mount a fdescfs(5) filesystem on the chrooted /dev/fd directory. mount.procfs Mount a procfs(5) filesystem on the chrooted /proc directory. allow.dying Allow making changes to a dying jail. depend Specify a jail (or jails) that this jail depends on. When this jail is to be created, any jail(s) it depends on must already exist. If not, they will be created automatically, up to the completion of the last exec.poststart command, before any action will taken to create this jail. When jails are removed the oppo- site is true: this jail will be removed, up to the last exec.poststop command, before any jail(s) it depends on are stopped. EXAMPLES Jails are typically set up using one of two philosophies: either to con- strain a specific application (possibly running with privilege), or to create a ``virtual system image'' running a variety of daemons and ser- vices. In both cases, a fairly complete file system install of FreeBSD is required, so as to provide the necessary command line tools, daemons, libraries, application configuration files, etc. However, for a virtual server configuration, a fair amount of additional work is required so as to replace the ``boot'' process. This manual page documents the configu- ration steps necessary to support either of these steps, although the configuration steps may need to be refined based on local requirements. Setting up a Jail Directory Tree To set up a jail directory tree containing an entire FreeBSD distribu- tion, the following sh(1) command script can be used: D=/here/is/the/jail cd /usr/src mkdir -p $D make world DESTDIR=$D make distribution DESTDIR=$D In many cases this example would put far more in the jail than needed. In the other extreme case a jail might contain only one file: the exe- cutable to be run in the jail. We recommend experimentation, and caution that it is a lot easier to start with a ``fat'' jail and remove things until it stops working, than it is to start with a ``thin'' jail and add things until it works. Setting Up a Jail Do what was described in Setting Up a Jail Directory Tree to build the jail directory tree. For the sake of this example, we will assume you built it in /data/jail/testjail, for a jail named ``testjail''. Substi- tute below as needed with your own directory, IP address, and hostname. Setting up the Host Environment First, set up the real system's environment to be ``jail-friendly''. For consistency, we will refer to the parent box as the ``host environment'', and to the jailed virtual machine as the ``jail environment''. Since jails are implemented using IP aliases, one of the first things to do is to disable IP services on the host system that listen on all local IP addresses for a service. If a network service is present in the host environment that binds all available IP addresses rather than specific IP addresses, it may service requests sent to jail IP addresses if the jail did not bind the port. This means changing inetd(8) to only listen on the appropriate IP address, and so forth. Add the following to /etc/rc.conf in the host environment: sendmail_enable="NO" inetd_flags="-wW -a 192.0.2.23" rpcbind_enable="NO" 192.0.2.23 is the native IP address for the host system, in this example. Daemons that run out of inetd(8) can be easily configured to use only the specified host IP address. Other daemons will need to be manually con- figured -- for some this is possible through rc.conf(5) flags entries; for others it is necessary to modify per-application configuration files, or to recompile the application. The following frequently deployed ser- vices must have their individual configuration files modified to limit the application to listening to a specific IP address: To configure sshd(8), it is necessary to modify /etc/ssh/sshd_config. To configure sendmail(8), it is necessary to modify /etc/mail/sendmail.cf. For named(8), it is necessary to modify /etc/namedb/named.conf. In addition, a number of services must be recompiled in order to run them in the host environment. This includes most applications providing ser- vices using rpc(3), such as rpcbind(8), nfsd(8), and mountd(8). In gen- eral, applications for which it is not possible to specify which IP address to bind should not be run in the host environment unless they should also service requests sent to jail IP addresses. Attempting to serve NFS from the host environment may also cause confusion, and cannot be easily reconfigured to use only specific IPs, as some NFS services are hosted directly from the kernel. Any third-party network software run- ning in the host environment should also be checked and configured so that it does not bind all IP addresses, which would result in those ser- vices also appearing to be offered by the jail environments. Once these daemons have been disabled or fixed in the host environment, it is best to reboot so that all daemons are in a known state, to reduce the potential for confusion later (such as finding that when you send mail to a jail, and its sendmail is down, the mail is delivered to the host, etc.). Configuring the Jail Start any jail for the first time without configuring the network inter- face so that you can clean it up a little and set up accounts. As with any machine (virtual or not), you will need to set a root password, time zone, etc. Some of these steps apply only if you intend to run a full virtual server inside the jail; others apply both for constraining a par- ticular application or for running a virtual server. Start a shell in the jail: jail -c path=/data/jail/testjail mount.devfs \ host.hostname=testhostname ip4.addr=192.0.2.100 \ command=/bin/sh Assuming no errors, you will end up with a shell prompt within the jail. You can now run /usr/sbin/sysinstall and do the post-install configura- tion to set various configuration options, or perform these actions manu- ally by editing /etc/rc.conf, etc. +o Configure /etc/resolv.conf so that name resolution within the jail will work correctly. +o Run newaliases(1) to quell sendmail(8) warnings. +o Set a root password, probably different from the real host sys- tem. +o Set the timezone. +o Add accounts for users in the jail environment. +o Install any packages the environment requires. You may also want to perform any package-specific configuration (web servers, SSH servers, etc), patch up /etc/syslog.conf so it logs as you would like, etc. If you are not using a virtual server, you may wish to modify syslogd(8) in the host environment to listen on the syslog socket in the jail environment; in this example, the syslog socket would be stored in /data/jail/testjail/var/run/log. Exit from the shell, and the jail will be shut down. Starting the Jail You are now ready to restart the jail and bring up the environment with all of its daemons and other programs. Create an entry for the jail in /etc/jail.conf: testjail { path = /tmp/jail/testjail; mount.devfs; host.hostname = testhostname; ip4.addr = 192.0.2.100; interface = ed0; exec.start = "/bin/sh /etc/rc"; exec.stop = "/bin/sh /etc/rc.shutdown"; } To start a virtual server environment, /etc/rc is run to launch various daemons and services, and /etc/rc.shutdown is run to shut them down when the jail is removed. If you are running a single application in the jail, substitute the command used to start the application for ``/bin/sh /etc/rc''; there may be some script available to cleanly shut down the application, or it may be sufficient to go without a stop command, and have jail send SIGTERM to the application. Start the jail by running: jail -c testjail A few warnings may be produced; however, it should all work properly. You should be able to see inetd(8), syslogd(8), and other processes run- ning within the jail using ps(1), with the `J' flag appearing beside jailed processes. To see an active list of jails, use jls(8). If sshd(8) is enabled in the jail environment, you should be able to ssh(1) to the hostname or IP address of the jailed environment, and log in using the accounts you created previously. It is possible to have jails started at boot time. Please refer to the ``jail_*'' variables in rc.conf(5) for more information. Managing the Jail Normal machine shutdown commands, such as halt(8), reboot(8), and shutdown(8), cannot be used successfully within the jail. To kill all processes from within a jail, you may use one of the following commands, depending on what you want to accomplish: kill -TERM -1 kill -KILL -1 This will send the SIGTERM or SIGKILL signals to all processes in the jail -- be careful not to run this from the host environment! Once all of the jail's processes have died, unless the jail was created with the persist parameter, the jail will be removed. Depending on the intended use of the jail, you may also want to run /etc/rc.shutdown from within the jail. To shut down the jail from the outside, simply remove it with jail -r, which will run any commands specified by exec.stop, and then send SIGTERM and eventually SIGKILL to any remaining jailed processes. The /proc/pid/status file contains, as its last field, the name of the jail in which the process runs, or ``-'' to indicate that the process is not running within a jail. The ps(1) command also shows a `J' flag for processes in a jail. You can also list/kill processes based on their jail ID. To show pro- cesses and their jail ID, use the following command: ps ax -o pid,jid,args To show and then kill processes in jail number 3 use the following com- mands: pgrep -lfj 3 pkill -j 3 or: killall -j 3 Jails and File Systems It is not possible to mount(8) or umount(8) any file system inside a jail unless the file system is marked jail-friendly, the jail's allow.mount parameter is set, and the jail's enforce_statfs parameter is lower than 2. Multiple jails sharing the same file system can influence each other. For example, a user in one jail can fill the file system, leaving no space for processes in the other jail. Trying to use quota(1) to prevent this will not work either, as the file system quotas are not aware of jails but only look at the user and group IDs. This means the same user ID in two jails share a single file system quota. One would need to use one file system per jail to make this work. Sysctl MIB Entries The read-only entry security.jail.jailed can be used to determine if a process is running inside a jail (value is one) or not (value is zero). The variable security.jail.max_af_ips determines how may address per address family a jail may have. The default is 255. Some MIB variables have per-jail settings. Changes to these variables by a jailed process do not affect the host environment, only the jail envi- ronment. These variables are kern.securelevel, kern.hostname, kern.domainname, kern.hostid, and kern.hostuuid. Hierarchical Jails By setting a jail's children.max parameter, processes within a jail may be able to create jails of their own. These child jails are kept in a hierarchy, with jails only able to see and/or modify the jails they cre- ated (or those jails' children). Each jail has a read-only parent param- eter, containing the jid of the jail that created it; a jid of 0 indi- cates the jail is a child of the current jail (or is a top-level jail if the current process isn't jailed). Jailed processes are not allowed to confer greater permissions than they themselves are given, e.g., if a jail is created with allow.nomount, it is not able to create a jail with allow.mount set. Similarly, such restrictions as ip4.addr and securelevel may not be bypassed in child jails. A child jail may in turn create its own child jails if its own children.max parameter is set (remember it is zero by default). These jails are visible to and can be modified by their parent and all ances- tors. Jail names reflect this hierarchy, with a full name being an MIB-type string separated by dots. For example, if a base system process creates a jail ``foo'', and a process under that jail creates another jail ``bar'', then the second jail will be seen as ``foo.bar'' in the base system (though it is only seen as ``bar'' to any processes inside jail ``foo''). Jids on the other hand exist in a single space, and each jail must have a unique jid. Like the names, a child jail's path appears relative to its creator's own path. This is by virtue of the child jail being created in the chrooted environment of the first jail. SEE ALSO killall(1), lsvfs(1), newaliases(1), pgrep(1), pkill(1), ps(1), quota(1), jail_set(2), devfs(5), fdescfs(5), jail.conf(5), linprocfs(5), linsysfs(5), procfs(5), rc.conf(5), sysctl.conf(5), chroot(8), devfs(8), halt(8), ifconfig(8), inetd(8), jexec(8), jls(8), mount(8), named(8), reboot(8), rpcbind(8), sendmail(8), shutdown(8), sysctl(8), syslogd(8), umount(8) HISTORY The jail utility appeared in FreeBSD 4.0. Hierarchical/extensible jails were introduced in FreeBSD 8.0. The configuration file was introduced in FreeBSD 9.1. AUTHORS The jail feature was written by Poul-Henning Kamp for R&D Associates who contributed it to FreeBSD. Robert Watson wrote the extended documentation, found a few bugs, added a few new features, and cleaned up the userland jail environment. Bjoern A. Zeeb added multi-IP jail support for IPv4 and IPv6 based on a patch originally done by Pawel Jakub Dawidek for IPv4. James Gritton added the extensible jail parameters, hierarchical jails, and the configuration file. BUGS It might be a good idea to add an address alias flag such that daemons listening on all IPs (INADDR_ANY) will not bind on that address, which would facilitate building a safe host environment such that host daemons do not impose on services offered from within jails. Currently, the sim- plest answer is to minimize services offered on the host, possibly limit- ing it to services offered from inetd(8) which is easily configurable. NOTES Great care should be taken when managing directories visible within the jail. For example, if a jailed process has its current working directory set to a directory that is moved out of the jail's chroot, then the process may gain access to the file space outside of the jail. It is recommended that directories always be copied, rather than moved, out of a jail. In addition, there are several ways in which an unprivileged user outside the jail can cooperate with a privileged user inside the jail and thereby obtain elevated privileges in the host environment. Most of these attacks can be mitigated by ensuring that the jail root is not accessible to unprivileged users in the host environment. Regardless, as a general rule, untrusted users with privileged access to a jail should not be given access to the host environment. FreeBSD 11.1 April 30, 2016 FreeBSD 11.1
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | HISTORY | AUTHORS | BUGS | NOTES
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=jail&sektion=8&manpath=FreeBSD+11.1-RELEASE+and+Ports>