FreeBSD Manual Pages
MAKEFS(8) FreeBSD System Manager's Manual MAKEFS(8) NAME makefs -- create a file system image from a directory tree SYNOPSIS makefs [-x] [-B byte-order] [-b free-blocks] [-d debug-mask] [-F specfile] [-f free-files] [-M minimum-size] [-m maximum-size] [-N userdb-dir] [-o fs-options] [-S sector-size] [-s image-size] [-t fs-type] image-file directory DESCRIPTION The utility makefs creates a file system image into image-file from the directory tree directory. No special devices or privileges are required to perform this task. The options are as follows: -B byte-order Set the byte order of the image to byte-order. Valid byte orders are `4321', `big', or `be' for big endian, and `1234', `little', or `le' for little endian. Some file systems may have a fixed byte order; in those cases this argument will be ignored. -b free-blocks Ensure that a minimum of free-blocks free blocks exist in the image. An optional `%' suffix may be provided to indicate that free-blocks indicates a percentage of the calculated image size. -d debug-mask Enable various levels of debugging, depending upon which bits are set in debug-mask. XXX: document these -F specfile Use specfile as an mtree(8) `specfile' specification. If a specfile entry exists in the underlying file system, its per- missions and modification time will be used unless specifically overridden by the specfile. An error will be raised if the type of entry in the specfile conflicts with that of an existing entry. In the opposite case (where a specfile entry does not have an entry in the underlying file system) the following occurs: If the spec- file entry is marked optional, the specfile entry is ignored. Oth- erwise, the entry will be created in the image, and it is necessary to specify at least the following parameters in the specfile: type, mode, gname, or gid, and uname or uid, and link (in the case of symbolic links). If time isn't provided, the current time will be used. If flags isn't provided, the current file flags will be used. Missing regular file entries will be created as zero-length files. -f free-files Ensure that a minimum of free-files free files (inodes) exist in the image. An optional `%' suffix may be provided to indicate that free-files indicates a percentage of the calculated image size. -M minimum-size Set the minimum size of the file system image to minimum-size. -m maximum-size Set the maximum size of the file system image to maximum-size. An error will be raised if the target file system needs to be larger than this to accommodate the provided directory tree. -N dbdir Use the user database text file master.passwd and group database text file group from dbdir, rather than using the results from the system's getpwnam(3) and getgrnam(3) (and related) library calls. -o fs-options Set file system specific options. fs-options is a comma separated list of options. Valid file system specific options are detailed below. -S sector-size Set the file system sector size to sector-size. Defaults to 512. -s image-size Set the size of the file system image to image-size. -t fs-type Create an fs-type file system image. The following file system types are supported: ffs BSD fast file system (default). cd9660 ISO 9660 file system. -x Exclude file system nodes not explicitly listed in the specfile. Where sizes are specified, a decimal number of bytes is expected. Two or more numbers may be separated by an ``x'' to indicate a product. Each number may have one of the following optional suffixes: b Block; multiply by 512 k Kibi; multiply by 1024 (1 KiB) m Mebi; multiply by 1048576 (1 MiB) g Gibi; multiply by 1073741824 (1 GiB) t Tebi; multiply by 1099511627776 (1 TiB) w Word; multiply by the number of bytes in an integer FFS-specific options ffs images have ffs-specific optional parameters that may be provided. Each of the options consists of a keyword, an equal sign (`='), and a value. The following keywords are supported: avgfilesize Expected average file size. avgfpdir Expected number of files per directory. bsize Block size. density Bytes per inode. fsize Fragment size. maxbpg Maximum blocks per file in a cylinder group. minfree Minimum % free. optimization Optimization preference; one of `space' or `time'. extent Maximum extent size. maxbpcg Maximum total number of blocks in a cylinder group. version UFS version. 1 for FFS (default), 2 for UFS2. CD9660-specific options cd9660 images have ISO9660-specific optional parameters that may be pro- vided. The arguments consist of a keyword and, optionally, an equal sign (`='), and a value. The following keywords are supported: allow-deep-trees Allow the directory structure to exceed the maximum specified in the spec. allow-max-name Allow 37 instead of 33 characters for file- names by omitting the version id. allow-multidot Allow multiple dots in a filename. applicationid Application ID of the image. archimedes Use the `ARCHIMEDES' extension to encode RISC OS metadata. chrp-boot Write an MBR partition table to the image to allow older CHRP hardware to boot. boot-load-segment Set load segment for the boot image. bootimage Filename of a boot image in the format ``sysid;filename'', where ``sysid'' is one of `i386', `mac68k', `macppc', or `powerpc'. generic-bootimage Load a generic boot image into the first 32K of the cd9660 image. hard-disk-boot Boot image is a hard disk image. keep-bad-images Don't throw away images whose write was aborted due to an error. For debugging pur- poses. label Label name of the image. no-boot Boot image is not bootable. no-emul-boot Boot image is a ``no emulation'' ElTorito image. no-trailing-padding Do not pad the image (apparently Linux needs the padding). preparer Preparer ID of the image. publisher Publisher ID of the image. rockridge Use RockRidge extensions (for longer file- names, etc.). volumeid Volume set identifier of the image. SEE ALSO mtree(8), newfs(8) HISTORY The makefs utility appeared in NetBSD 1.6. AUTHORS Luke Mewburn <lukem@NetBSD.org> (original program) Daniel Watt, Walter Deignan, Ryan Gabrys, Alan Perez-Rathke, Ram Vedam (cd9660 support) FreeBSD 11.1 January 10, 2009 FreeBSD 11.1
NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=makefs&sektion=8&manpath=FreeBSD+8.3-RELEASE>