Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
PST(4)                 FreeBSD Kernel Interfaces Manual                 PST(4)

NAME
     pst -- Device driver for Promise Supertrak SX6000

SYNOPSIS
     Include this line in the kernel config file:
     device pst

DESCRIPTION
     This driver is for the Promise Supertrak SX6000 ATA hardware RAID con-
     troller.  It supports (in hardware) RAID levels 0, 1, 0+1, 3, 5 and JBOD
     on up to 6 ATA disk drives, including automatic rebuild and hotswap, and
     supports signalling disk status on LED's on Promise Superswap disk enclo-
     sures.  The Supertrak lines of controllers does not support non-disk
     devices.

NOTES
     The pst driver does not support manipulating the RAID from the OS, RAID's
     need to be setup from the onboard BIOS. However hot swap, hot spare, and
     automatic rebuilds are supported without reboot.

HISTORY
     The pst driver first appeared in FreeBSD 4.7.

AUTHORS
     The pst driver and man page was written by Soren Schmidt
     <sos@FreeBSD.org>.

FreeBSD 4.10                   November 21, 2001                  FreeBSD 4.10
NAME | SYNOPSIS | DESCRIPTION | NOTES | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=pst&sektion=4&manpath=FreeBSD+4.10-RELEASE>

home | help