FreeBSD Manual Pages
SND_SBC(4) FreeBSD Kernel Interfaces Manual SND_SBC(4) NAME snd_sbc -- Creative Sound Blaster ISA and compatible bridge device driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device sound device snd_sbc Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): snd_sbc_load="YES" Non-PnP cards require the following lines in device.hints(5): hint.sbc.0.at="isa" hint.sbc.0.port="0x220" hint.sbc.0.irq="5" hint.sbc.0.drq="1" hint.sbc.0.flags="0x15" DESCRIPTION The snd_sbc bridge driver allows the generic audio drivers including sound(4) to attach to Creative Sound Blaster ISA compatible audio cards. The value of flags specifies the secondary DMA channel. If the secondary DMA channel is C, set the flags to (C | 0x10). For a sound card without the secondary DMA channel, the flags should be set to zero. HARDWARE The snd_sbc driver supports the following sound cards: +o Avance Asound 110 +o Avance Logic ALS100+ +o Avance Logic ALS120 +o Creative SB16 +o Creative SB32 +o Creative AWE64 +o Creative AWE64 Gold +o Creative ViBRA16C +o Creative ViBRA16X +o ESS ES1681 +o ESS ES1688 +o ESS ES1868 +o ESS ES1869 +o ESS ES1878 +o ESS ES1879 +o ESS ES1888 DIAGNOSTICS sb_dspwr(XX) timed out. A command to the DSP has timed out. Check the I/O port configuration. bad irq XX (5/7/9/10 valid) The IRQ given to the driver is not valid. SEE ALSO sound(4) HISTORY The snd_sbc device driver first appeared in FreeBSD 4.0. AUTHORS Seigo Tanimura <tanimura@r.dl.itc.u-tokyo.ac.jp> FreeBSD 11.1 December 15, 2005 FreeBSD 11.1
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=snd_sbc&sektion=4&manpath=FreeBSD+6.1-RELEASE>