FreeBSD Manual Pages
UHSOCTL(1) FreeBSD General Commands Manual UHSOCTL(1) NAME uhsoctl -- connection utility for Option based devices SYNOPSIS uhsoctl [-a apn] [-c cid] [-p pin] [-u username] [-k password] [-r path] [-f path] [-b | -n] interface uhsoctl -d interface uhsoctl -h DESCRIPTION uhsoctl is a small connection utility for Option N.V. devices that are based on Options packet interface and uses proprietary AT_* calls to establish connections. The utility (tries to) configure both default route and name servers (/etc/resolv.conf). By default uhsoctl detaches from the terminal upon on a successful con- nection, a few command-line options exists that allows this behavior to be changed. uhsoctl attempts to find a usable controlling serial port based on the provided network interface. If this fails you might specify a serial port manually. OPTIONS -a apn Specify APN to connect to. -c cid Specify CID (Context ID) to use, by default CID 1 is used. If an APN has been configured once, it's enough to specify the CID used for further accesses. -p pin Specify SIM PIN. -u username Specify username. -k password Specify username. -r path Path to resolv.conf, default /etc/resolv.conf. Use /dev/null to disable updating of name servers. -f path Explicitly set the serial port to use as controlling terminal. Might be needed if the automatic detection fails. -b Fork into background directly, before a connection has been estab- lished. -n Never fork into background, run entirely in foreground. EXAMPLES Connect to ``apn.example.com'' on interface ``uhso0'' and use PIN ``1234'' to enable the SIM card. uhsoctl -a apn.example.com -p 1234 uhso0 Disconnect from a previously established connection uhsoctl -d uhso0 SEE ALSO uhso(4) FreeBSD 11.1 Aug 12, 2009 FreeBSD 11.1
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uhsoctl&sektion=1&manpath=FreeBSD+8.1-RELEASE>