FreeBSD Manual Pages
UVSCOM(4) FreeBSD Kernel Interfaces Manual UVSCOM(4) NAME uvscom -- USB support for SUNTAC Slipper U VS-10U serial adapters driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device usb device ucom device uvscom Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): uvscom_load="YES" HARDWARE The uvscom driver supports the following adapters: +o DDI Pocket Air H" C@rd +o DDI Pocket Air H" C@rd 64 +o NTT P-in +o NTT P-in m@ster DESCRIPTION The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip. Slipper U is a PC Card to USB converter for data communication card adapters. The device is accessed through the ucom(4) driver which makes it behave like a tty(4). FILES /dev/ttyU* for callin ports /dev/ttyU*.init /dev/ttyU*.lock corresponding callin initial-state and lock-state devices /dev/cuaU* for callout ports /dev/cuaU*.init /dev/cuaU*.lock corresponding callout initial-state and lock-state devices SEE ALSO tty(4), ucom(4), usb(4) HISTORY The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002. FreeBSD 11.1 April 26, 2017 FreeBSD 11.1
NAME | SYNOPSIS | HARDWARE | DESCRIPTION | FILES | SEE ALSO | HISTORY
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uvscom&sektion=4&manpath=FreeBSD+11.1-RELEASE+and+Ports>